Hot glue fix dents? #Shorts

2021/04/ 1
14 457 343 عدد المشاهدات

Merch: fanparel.com/collections/dylan-ayres
Tik Tok: Dylandoestiktok1
Instagram: instagram.com/dylanayrestiktok/

تعليقات
  • He did it wrong haha. You have to get the sticks pretty melted and then allow them time to cool and dry then pull. It does work pretty well actually

    Captain J The BKCaptain J The BK18 دقائق قبل
  • Try holding the gurl there so it can dry a bit THEN pull it off

    JasminePlayzJasminePlayz25 دقائق قبل
  • It works, i tried this on my car a while back but it is time consuming and the glue has to be cool to the touch.

    DJ_ Lifestyle_DJ_ Lifestyle_36 دقائق قبل
  • Only works on cheap throw away commuter cars w thin boby panels

    Nevaeh ReedNevaeh Reed37 دقائق قبل
  • Rich people I tell ya. Lol

    MINTYFRESH650MINTYFRESH65040 دقائق قبل
  • Dude didn't do it right

    Andrew BakerAndrew Baker42 دقائق قبل
  • His problem was that he followed 5 minute crafts

    Omar AmshaOmar Amsha42 دقائق قبل
  • You should use hot water treatment and spray paint, it's the safest method.

    OllicronOllicron43 دقائق قبل
  • Moral of the story : dont trust 5 minute craft

    Marshella HuangMarshella Huangساعات قبل
  • Maybe your putted to much Fire on the glue

    call me Alexa or Alexandracall me Alexa or Alexandraساعات قبل
  • Try hot water and a plunger

    Samuel KirkSamuel Kirkساعات قبل
  • You didn't do it right.

    Ace BrocktonAce Brocktonساعات قبل
  • 5 minute crafts videos are jyst clickbait and total bullshit.

    Grise BlacolarGrise Blacolarساعات قبل
  • Bruh "THIS IS INDEED, CAP..." Lol

    Tsm_ ChiuyTsm_ Chiuyساعات قبل
  • Buat rosak kereta je

    noradila nasirrudinnoradila nasirrudinساعات قبل
  • Let it dry

    vGriffovGriffo2 ساعات قبل
  • I made a dent with my rubber band ball. Priceless. That made me laugh.

    Mike CMike C2 ساعات قبل
  • You gotta let it fully dry- I mean it prolly won’t work either way but-

    FrexiiFrexii2 ساعات قبل
  • Use a lot more glue sticks and let it dry

    Jacob PointerJacob Pointer2 ساعات قبل
  • Did u let it cool?

    Vexzy._Vexzy._2 ساعات قبل
  • You did not let it dry

    Reed BurgamyReed Burgamy2 ساعات قبل
  • plunger will work but it will rip off the paint

    Mr.pirate guyMr.pirate guy2 ساعات قبل
  • Let it dry first and see what happens

    Kel KeyKel Key2 ساعات قبل
  • Stupid

    xWritezxWritez2 ساعات قبل
  • ก็มันยังไม่แห้งอะไอ่เวร

    Siwakon MonwangSiwakon Monwang2 ساعات قبل
  • You have to wait until the glue dries enough

    Landen BottsLanden Botts2 ساعات قبل
  • Big brain over here not letting the glue cool down at all lmfao

    PhantomicCoPhantomicCo2 ساعات قبل
  • He didn't snap it back and pulled it slowly...

    Diss-Abled GamerDiss-Abled Gamer2 ساعات قبل
  • You know you have to let it dry

    Krish PatelKrish Patel2 ساعات قبل
  • You have to hold the glue sticks for longer so they stick good

    Jacksonfisher1000Jacksonfisher10002 ساعات قبل
  • I did it and it does work it just that you need to leave in the car for like 5 minutes and then you pull it out

    Roger MolinaRoger Molina3 ساعات قبل
  • 🤣🤣🤣CAP🤣🤣🤣

    Cheray CuthbertsonCheray Cuthbertson3 ساعات قبل
  • It might be the glue

    tafota 577tafota 5773 ساعات قبل
  • I think you were supposed to wait for it to dry

    Steele_elite_skateSteele_elite_skate3 ساعات قبل
  • Dude just give the car to me. Wasting a perfectly good car

    Giovanni PiergrossiGiovanni Piergrossi3 ساعات قبل
  • Let the glue cool down first

    Jeffrey GutierrezJeffrey Gutierrez3 ساعات قبل
  • Btw there is people inside the car push the door where the damage so it's fix btw don't try any hack it's ruined you life

    Star PlatinumStar Platinum3 ساعات قبل
  • He didn’t wait near long enough

    Will After DarkWill After Dark3 ساعات قبل
  • wait for dry, gblok

    Meme NewMeme New3 ساعات قبل
  • Gotta heat the dent up with boiling water genius

    MyThirstForTheeMyThirstForThee3 ساعات قبل
  • You gotta let it stick for like- 5-8 minutes or so :)

    T MT M3 ساعات قبل
  • Did you leave it on it long enough

    _Crzy __Crzy _4 ساعات قبل
  • Soooo ARworlds has tic tok shit now wtffff

    Fujimo YTFujimo YT4 ساعات قبل
  • Its because you have a car with a metal exterior, the one that worked is made out of fiber glass or plastic

    Zachary MillerZachary Miller4 ساعات قبل
  • Use toilet plunger and hot water it works

    Howdy Ya’llHowdy Ya’ll4 ساعات قبل
  • 😂

    Afsha FatimaAfsha Fatima4 ساعات قبل
  • LOOK UP, PDR.........

    Captain GallagherCaptain Gallagher4 ساعات قبل
  • he just fricked up his car.

    Spectre ChromeESpectre ChromeE4 ساعات قبل
  • Didn’t do it long enough

    Leah IdkLeah Idk4 ساعات قبل
  • Man this lifehack sucks even if it would work, it leaves traces of glue on the car, which just simply fucks over the paint and makes the repair costs more. Often times if the dent is in a part where the other side of the metal is visible (say by the fenders) a hammer is all you need.

    SuperSonic486SuperSonic4864 ساعات قبل
  • You’re supposed to let it cool down 😫

    ValeriaValeria4 ساعات قبل
  • LET THE GLUE DRY MY GUY

    Nick KrahnNick Krahn4 ساعات قبل
  • Is your mother the sister of your father ? because it's can explain a lot of thing 🧐

    azerty azertyazerty azerty4 ساعات قبل
  • Maybe let it properly stick

    average otaku Aaverage otaku A4 ساعات قبل
  • 5 Minute Crafts : Let it cool! Dylan : **Doesn't let it cool** Also Dylan : *This is cap*

    b_duob_duo4 ساعات قبل
  • Pulled the glue before I could actually stick to the mettle

    Tristan HallTristan Hall4 ساعات قبل
  • Pulled the glue before I could actually stick to the mettle

    Tristan HallTristan Hall5 ساعات قبل
  • This is why Tik tok really grinds my gears

    jake scallijake scalli5 ساعات قبل
  • Nigga let the glue setttle and cool

    Glocc BoyGlocc Boy5 ساعات قبل
  • U have to leave it and let it dry

    Eli SmallwoodEli Smallwood5 ساعات قبل
  • Just use a fucking plunger.

    Ace CloverAce Clover5 ساعات قبل
  • When u know u failed the second time but u still try to stick em back

    HoodYungn FredoHoodYungn Fredo5 ساعات قبل
  • Your supposed to wait a bit before pulling

    Anthony BondsAnthony Bonds5 ساعات قبل
  • Leave it on for ponger

    Nayeli TNayeli T5 ساعات قبل
  • Ur trying that on american steel That mazda or whatever in the video is probably dent resistant plastic which is much easier to pop back out. Plus it was on a big flat panel. Most of your dents were on or near body lines

    Steve RogersSteve Rogers5 ساعات قبل
  • Scuff the paint first

    Colin DavidsonColin Davidson5 ساعات قبل
  • It appears the difference is the video you are looking at let his dry before pulling... Not to be rude, but pretty much a common sense thing actually.

    Butterfly EffectButterfly Effect5 ساعات قبل
  • IT DEpends on the type of hot glue ur using

    Xpandar VlogsXpandar Vlogs5 ساعات قبل
  • Lol

    Life of KingstonLife of Kingston5 ساعات قبل
  • let it cool down first

    Bryan BAMBryan BAM5 ساعات قبل
  • Don’t do that wait for the hot glue to dry on the car then after that you pull it out and then you can cut off the hot glue please try to go

    The Pinky star13 The queenThe Pinky star13 The queen5 ساعات قبل
  • You did wrong, u had to warm the car instead

    Gabriel D'avilaGabriel D'avila5 ساعات قبل
  • Sycopath

    Star PrestigeStar Prestige5 ساعات قبل
  • Hmm its almost like glue needs to cool down

    alex wetherellalex wetherell5 ساعات قبل
  • Was their dent on plastic and yours on metal?

    Slade DalleySlade Dalley6 ساعات قبل
  • I’m mean it’s 5 minute crafts did you expect it to work

    Ex3dousEx3dous6 ساعات قبل
  • Yeah, I never would've thought that'd work & I feel bad for your SUV. I'll take care of the SUV; how about that? He'll be happy at his new home with me.

    Brit SehnsuchtBrit Sehnsucht6 ساعات قبل
  • I didn't expect that it would work anyways, this is 5 Minute Crafts we r talking about for God's sake

    Hashir JamalHashir Jamal6 ساعات قبل
  • Let it stay up there for a few secs and let it cool

    Damario RatcliffDamario Ratcliff6 ساعات قبل
  • dont really care mate

    shomelshomel6 ساعات قبل
  • You have to let the glue dry

    xd Psychedelicxd Psychedelic6 ساعات قبل
  • Maybe he waited for the glue to actually stick

    Mini Zayjr99Mini Zayjr996 ساعات قبل
  • You gotta let the glue dry my dude

    Crypst0fer _Crypst0fer _6 ساعات قبل
  • Bro it was 5 minutes craft what were you gonna expect?

    bro okbro ok6 ساعات قبل
  • Bro my mum was going to try this NOW I CAN PROVE HER WRONG

    Aliya GalyavievaAliya Galyavieva6 ساعات قبل
  • Prolly didn’t let it cool

    Noah MnorNoah Mnor6 ساعات قبل
  • Your supposed to let it melt onto the car

    Dark ShadowzDark Shadowz6 ساعات قبل
  • Just my guess, probably have to wait till it’s a little warmer out

    Ray HarriottRay Harriott6 ساعات قبل
  • Lol dude let the fkn glue dry you impatient imp.

    Elliot SparElliot Spar6 ساعات قبل
  • You need to let the glue dry

    HuntermelliottHuntermelliott7 ساعات قبل
  • You do not make good. Look at Ad Buster Chanel.

    Mateusz KoterbaMateusz Koterba7 ساعات قبل
  • Let it cool

    John Maverick CadornaJohn Maverick Cadorna7 ساعات قبل
  • Put boiling water on it then use a plunger to pull it out

    Simmer_SimSimmer_Sim7 ساعات قبل
  • Let’s yank the glue while still hot! Let’s not let it dry! Haha told you it was fake

    Kevin AKevin A7 ساعات قبل
  • Idiot kid. Wait for the glue to cool down and dont just pull,

    Raymart NapalangRaymart Napalang7 ساعات قبل
  • You have to wait for it to cool down

    Miguel Caraballo DiazMiguel Caraballo Diaz7 ساعات قبل
  • I'd use a plunger i heard it helps quite a bit

    Adam OlivarezAdam Olivarez7 ساعات قبل
  • I’m ducking stupid asf, but I bet you I would have found a way to get it undented

    G EsG Es7 ساعات قبل
  • Get a plunger and hot water it should work it workt by me!

    Ajlaa SalkanovicAjlaa Salkanovic7 ساعات قبل
  • You don’t just pull it off straight away you let it cool down and set then do it

    Benedict taylorBenedict taylor7 ساعات قبل
ARworlds